Kategorier

Natural sound for acoustic guitar and vocal The Stageman II AC-60 has 2 channels and both are optimized for acoustic guitar and microphone inputs respectively.The dual-input channels, on the NUX Stageman II AC-60 acoustic guitar amplifier, provide you with even more options for gigs or studio recording. Equipped with NUX's latest DSP technology, the Stageman II AC-60 delivers pure, rich acoustic sound with projection far beyond its size.The Stageman II AC-60 has flexible outputs for both stage and recording applications, and is designed for your interface needs. XLR DI output and Line output jack can be used as an analog audio-out for recording or sending to a monitor. Impulse Response(IR) Function Creates legendary guitar sounds The Stageman II AC-60 is loaded with 8 impulse response files. Each impulse response file is optimized for the guitar type and the pickup type. The IR file names are included in the guitar profile, optimized guitar type, and the pickup type. Connect the Stageman II AC-60 with your mobile phone(app) to activate/ deactivate the IR function. Built-in Looper and Drum The stageman II AC-60, comes stock with a dual-footswitch in the package. With the dual-footswitch, you can easily control the built-in Looper and Drum. You can play solo just like with a band! Stageman II AC-60 Mobile App 12 effects, 8 IRs, and 6 signal block routings We also developed a mobile App for you to control the Stageman II AC-60 amplifier with your smart phone. You can switch the amp's channels and choose to your favorite signal block routing for the instrument input. There are 12 effects including Chorus, Delay, Tape Echo, Modulation, Reverb, etc. There are 8 IRs truly simulating many legendary guitar sounds. You can control everything, choose any effect you want and adjust the parameters, and there are more functions including some application exclusive features. The Stageman II AC-60 provides the musical sound that will keep you playing for countless of hours. Also, you can connect your mobile phone with Stageman II AC-60 via the Bluetooth, and play along with your favorite music. Specifications - 60 watts rich warm sound acoustic amp with 6.5” premium speaker and 1” tweeter - 2 independent channels with routing adjustable post-effects - Acoustic Impulse Response - Drum & Loop (60s phrase loop) - Bluetooth Audio Stream - Free APP controller - USB firmware update - Dimensions: 310(L)mm * 280(W)mm * 328(H)mm - Weight: 9.2 kg - What's in the Box: NMP-2 Dual Lite FootSwitch, TRS Cable (for NMP-2), Power Adaptor, User Manual

NUX B-3 Mobile Addon B3 wireless system with any mobile phone. Simply you can use for video blogging or live streaming via mobile phones. The package offers phone holder with cold shoe and 3.5mm TRS to TRRS adaptor cable to fit most mobile phones.(CTIA stander, like iOS and Samsung devices.)

NUX B-5RC 2.4GHz Wireless System B-5RC wireless system fits in perfectly with all types of electric guitar, acoustic-electric guitar, bass guitar, Ukulele. Enhanced by the latest wireless technology innovation and upgraded algorithm, B-5/B-5RC can now work well with instruments that are equipped with active pickups. Moreover, it comes with the ground-breaking auto-matching system which allows you to enjoy complete freedom without any setup. Enjoy, have fun & rock on ! Features: Operating Frequency Band: 2.4GHz Audio Quality: 24-bit 44.1 KHz Transmission Range: 50 feet / 15m line-of-sight Frequency response: 20Hz – 20kHz Latency:Less than 5ms THD+ Noise: Less than 0.05% 1kHz @-10dbFS Auto-OFF mode Built-in Battery Capacity: 3.7V/500mA (Transmitter and Receiver) Power Case Battery Capacity: 4000mAh Up to 15 hours of playing time No Buzzing/Humming With The Active Pickups NUX B-5 RC works perfectly with active/passive electric guitar and bass, and acoustic-electric guitars with piezo or magnetic pickup. The signal is crystal clear. High Quality Audio B-5 Wireless delivers the signal on 2.4 GHZ frequency range. That's a global interference-free broadcasting range you can use everywhere without a signal break. With the 24-bit 44.1 kHz audio quality you will never experience unwanted sound degradation Quick-Play, No Setup RequiredStay Charged, Stay Tuned! The B-5 wireless has a built-in long-lasting battery, you can play for up to 4 hours non-stop. And if you leave it ON for 10 minutes without playing, it shuts OFF automatically to save the battery life. And we created a useful solution for the gigging musician; B-5 RC Power Case is a charge station for B-5 wireless, it provides up to 15 hours battery life and charges the wireless system approximately 3 times. Wireless Freedom B-5 has a 50-foot (15 meters) line-in-sight wireless streaming distance, and it delivers the signal between the transmitter and the receiver in less than 5 milliseconds. There's also an optional Cable Tone simulation to get your tone with the cable capacitive effect without using a cord. Cable Tone simulation makes your sound as natural as using a high-quality cable. Press the receiver's power button (short click) to activate the Cable Tone, the LED indicator will change to ORANGE color. Ultimate Compatibility Our goal has always been making it with unbeatable compatibility. We designed the B-5 wireless to interface on a variety of guitar and bass guitar body types, so there are no issues regarding tremolo bars or angled input jacks. Slim and light design allows you to play comfortably on any guitar and bass guitar type, including acoustic guitars and ukulele

Whether your main choice is an overdrive or distortion, Boost Core Deluxe will be your best gear-mate. Now you can drive your amp to boost with the Boost Core Deluxe's gain knob, then sweeten or subdue your treble and bass frequencies with the onboard 2-band EQ. Boost Core Deluxe is handy enough as a standalone boost and an EQ pedal. With its analog circuitry and tone enhancement, Boost Core Deluxe is beyond price. Drive the booster into your favorite overdrive to let it raise the sonic mayhem! Boost Core Deluxe has all boosted sounds you want. Boost Core Deluxe is a Booster pedal providing you 3 types of boost modes, Clean, Drive and Spark. Clean mode is super-transparent +20dB clean boost and it also strengthening the original signal to against any sound degradation. Drive and Spark mode is +20dB gain boost with wide range parameter control and it offers enough gain for it to work as a drive pedal when turned all the way up. Equipped with Treble and Bass controls that allow you to adjust your sound and tune the frequency shape anyway you like. With Boost Core Deluxe; ?You can enhance your signal without any color changes in Clean mode with a tasty compressed sound or you can get additional warm tube sound on Dirt mode. If you want to go further, you can create a sparkling drive sound while you increase the power of your sound in Spark mode. From transparent, low-gain boost to all-out colored boost, Boost Core Deluxe has all boosted sounds you want. Harmonics will be a bonus while you play with a well-sustained guitar tone. It is recommended first to be used in effect chains.

NUX C-5RC 5.8GHz trådløst instrumentsystem C-5RC er et trådløst system for alle typer el-gitar, el-akustisk gitar, bassgitar, ukulele mm. Hvorfor 5.8GHz? Enkelt sagt: i våre hus er det stadig flere elektroniske enheter som sender på 2.4GHz-båndet. Ved å i stedet sende på det nyere 5.8GHz-båndet er det mindre sjanse for signalforstyrrelser og andre uønskede innvirkninger som følge av et frekvensbånd som er for travelt. I tillegg er systemet utstyrt med vårt revolusjonerende auto-koblingssystem som lar deg komme i gang uten å bruke masse tid på innstillinger. Bare nyt og ha det gøy! Ingen støy fra aktive pickups C-5RC fungerer perfekt med aktive eller passive pickuper i el-gitar og bass, samt el-akustiske gitarer med enten piezo- eller magnetiske pickuper. Signalet er krystallklart uansett. Høyoppløst lyd C-5RC overfører på 5.8GHz-frekvensbåndet - et støyfritt bånd som kan brukes hvor som helst uten signaltap, og med 24-bit / 44.1kHz-oppløsning vil du aldri oppleve forringelse av lydkvaliteten. Lad opp, vær klar Med det innebygde batteriet kan du spille i opptil 4 timer sammenhengende. "Auto Off"-modusen sørger også for å spare batteriet - hvis du lar systemet stå på uten å være i bruk, slås det automatisk av etter 10 minutter. Vi har også utviklet en praktisk løsning for musikere på farten: den inkluderte bæreesken til C-5RC kan også fungere som ladestasjon. Denne kan sørge for ca. 9 timers batterilevetid, eller ca. 3 komplette oppladninger. Trådløs frihet C-5RC har en rekkevidde på opptil 30 meter ved fri siktelinje, og signalet når frem med mindre enn 5ms forsinkelse. Skulle du likevel ønske den mer tradisjonelle lyden av et kablet instrument, finnes det også en valgfri Cable Tone Simulation-funksjon. Denne funksjonen slår du på/av med et kort trykk på "POWER/MUTE"-knappen. En oransje LED-indikator vises når funksjonen er på. Uendelig kompatibelt Et av målene da vi designet C-5RC-systemet, var at det skulle passe sammen med så mange typer instrumenter som mulig, uansett hvordan de er utformet. Det tynne, lette designet lar deg enkelt bruke systemet på hvilken som helst el-gitar, bassgitar, el-akustisk gitar, eller ukulele. Tekniske spesifikasjoner: - Frekvensbånd: 5.8GHz - Lydoppløsning: 24-bit / 44.1kHz - Signalrekkevidde: opptil 30 meter (over fri siktelinje) - Dynamisk rekkevidde: 110dB - Frekvensområde: 20Hz - 20kHz - Forsinkelse: mindre enn 5ms - THD + Noise: mindre enn 0.2% ved 1kHz - "Auto off"-modus - Batterikapasitet: 3.7V / 500mA (både sender og mottaker) 3000mAh (bæreeske) - Batterilevetid: opptil 4 timer - Dimensjoner (mm): 132 (bredde) x 93 (dybde) x 50 (høyde) - bæreeske 108 (bredde) x 30 (dybde) x 21 (høyde) - sender/mottaker - Nettovekt: 196g - bæreeske 34g - sender/mottaker

Introducing the brand new NUX DP-2000, a powerful integrated percussion pad. With its 8 velocity sensitive independent strike pads, the DP-2000 not only includes the high standard acoustic drum samples from our flagship DM-8 kit, but it also includes folk percussion and electronic sound samples. What’s more, you can expand your sound library by importing your own drum samples with a U disk. Additionally, the DP-2000 includes inputs for external triggers. Easily add a hi-hat pedal and external kick drum, making the DP-2000 a mini e-drum kit. High quality sound library The DP-2000 includes a selection of high quality acoustic drum samples from our flagship DM-8 and specially prepared percussion and electronic sounds to meet the artistic needs of musicians of different music styles. Further editing parameters enable you to assign and edit the position of each tone, pitch, phase and other detailed parameters. Even more possibilities The DP-2000 will find its way into your drumming ecosystem, either onstage next to your acoustic drum kit, or use the MIDI In/Out ports make it a secondary drum brain by connecting it to your already existing e-drum kit. Newly designed color screen The DP-2000 sports a newly designed UI interactive interface making for a smooth and positive workflow . These 8 velocity sensitive strike pads all have LED lights, and the brightness changes with dynamic playing and tone length, making for an expressive light show on any darkened stage. Effects The DP-2000 includes six on board effects, which can be assigned to the percussion pads or as BUS effects via the FX function on the panel. USB-C post-The best and most powerful friend of DP-2000 Easily expand your sound library for the DP-2000, by making use of the included USB port and a USB drive loaded with your favorite drum and percussion samples. The DP-2000 also supports WAV music playback via USB drive, making it a great performance and practice instrument. Specifications - Colorful large screen, simple operation interface - 20 presets include all style - Layer function can split a pad into two parts and assign sound separately - USB port for connecting Bluetooth module and USB drives - The Wavimport function allows for custom sound import into DP-2000 for use - Three additional interfaces can be external to kick, hihat control, and other triggers - New effector features for more diverse sound - Can be used in conjunction with other e-drums or acoustic drums - AUX IN, PHONES, OUTPUT, KICK, HH CTRL, TRIGGER IN, MIDI IN/OUT, USB DISK/BLUETOOTH MODULE, USB, DC

NUX Flanger Core Effect pedals Flanger Pedal with Two Modes Including Normal and Tape Tone Lock Function and One Preset Save/Recall Compact Design with Aluminium Housing True Bypass Design which Minimises Loss of Tone Runs on Battery or AC Power (sold separately) The NUX Flanger Core Guitar Effects Pedal is more than just a basic flanger pedal, it offers two types of flange effect including normal and tape. These two different effects can be tweaked with the additional control knobs to achieve a unique sound that will add an effect to your tone. Also includes a tone lock function to temporarily freeze your settings during live performances. With its compact size, the flanger Core can easily fit onto any pedalboard

NUX Mighty 15SE MIGHTY 15SE Digital Guitar Amplifier MIGHTY 15 has been one of the most popular amplifiers from NUX because of it has a friendly interface and great tone! Now NUX brings it to a whole new level by changing it to all digital platform and improving the sounds and effects! We are talking about the MIGHTY 15SE! The control panel is based on the MIGHTY 15 but when you start playing you will notice it is very dynamic and touch responsive, just like playing the real tube amps! MIGHTY 15SE makes sure you have enough power for small venues but still keep the sound man happy! If you want louder volume, the LINE OUT jack allows you to output the sound of MIGHTY 15SE to a big PA system!

Specification 20 Watt Output 1 x 8-inch speaker 4 Channels (Clean, Overdrive, Metal, Lead) Each channel has 2 presets Gain and Level controls, 3-band EQ (Bass - Mid - High) and Master Volume 18 Variety of effects (Chorus, Phaser, Tremolo, Vibe, Delay, and Reverb) 3 types of Reverb and 3 types of Delay 3 Effects can be activated at the same time (Mod - Delay - Reverb) TAP TEMPO 3.5mm Aux Input, Headphone Output Mighty 20 BT 20 Watt Modeling Amplifier It allows you to emulate the sound of a number of other amplifiers within a single package and offers some useful built-in effects as well. Loud enough to rock your party or you can keep it silent for practicing guitar only Great Experience of Musical Sounds Mighty 20 BT has 4 channels and each channel has 2 sound presets, and each preset offers one of the well-known amplifiers’ characteristic sound - in short, you will have 8 amps inside. So, you can get the real taste of different music and playing styles. 9 Variety of Digital Effects Mighty 20 BT allows you to use and combine 3 effects simultaneously. You can engage a mod effect, delay, and reverb at the same time and make an experiment on your sound with high-quality digital effects. 20 BT has 3 types of modulation effects, 3 types of reverb and delay effects. TAP TEMPO You can adjust the delay speed by using the TAP button to sync the delay effect with the groove. User Friendly Smart Design Drive sounds, digital effects and all other function controls can be easily operated by Mighty 20 BT’s user-friendly interface. You can tweak a variety of different sounds from different music styles and save as a preset, and you can recall anytime by single click. NUX Mighty 20 BT Digital Modeling Amplifier is also featured with a precise tuner, and 3 band equalizer. The amp has both a headphone output and an aux in. This allows you to practice along with any music player (or mobile phone) as well as practice in silence. NUX Mighty APP You can connect your mobile phone to Mighty 20 BT via the Bluetooth and play along with your favorite music. We also developed a mobile application to control Mighty 20 BT amplifier with your smart phone. You can switch the amp's channels and control the Gain, Level and Tone parameters. Choose any effect you want and adjust the parameters. You can control everything, and there are more functions including some application exclusive features. For example; you can a select Delay or Reverb and you can adjust the Mix and Repeat parameters on the amplifier's panel. And with the mobile APP; you can choose one of the three types of Delay effects and you can reach the Repeat, Mix and Time parameter controls (and the mobile TAP TEMPO) AND there are also three types of Reverb effects, you can control the Decay and Mix parameters. Plus, you can control the drum machine as well. As an exclusive, there are 3 modulation effects and a noise gate with related parameter controls. And we added a backing track library for your jam, but don't forget, the internet is the biggest backing track library. You can find everything you need for improving your guitar skill or jamming. Mighty Lite BT provides the musical sound that will keep you playing for countless hours. Each preset can be customized, and you can save the presets to personalize your amp with your very own sounds. Mighty app Androide/ios

NUX MIGHTY 40 BT Mighty 40 BT 40 Watt Modeling Amplifier A Powerful Modeling Amplifier with Bluetooth Connection Mighty 40 BT is 40 watt powered amplifier with 4 channels, digital effects, 3-band EQ and tuner. And you can connect any device by Bluetooth for playing along with your favorite music or backing track. Mighty 40 BT is 10-inch dynamic speaker equipped modeling amplifier, it's powerful. You can customize and save your own presets and bring your sound to any stage. Stage Friendly Sound, User Friendly Interface Bright and colorful LED buttons, ease to use smartly designed hardware interface 4 Channels, 8 presets with Gain and 3-band EQ All the presets can be customized, you can tweak the knobs or you can use the mobile application to adjust your desired sound and save it. 9 Variety of digital effects You can combine 3 effects simultaneously, a modulation effect, delay and reverb effects can be activated at same time. TAP TEMPO You can adjust the delay speed by tapping and sync with the groove. NUX Mighty APP You can connect your mobile phone to Mighty 40 BT via the Bluetooth and play along with your favorite music. We also developed a mobile application to control Mighty 40 BT amplifier with your smart phone. You can switch the amp's channels and control the Gain, Level and Tone parameters. Choose any effect you want and adjust the parameters. You can control everything, and there are more functions including some application exclusive features. For example; you can a select Delay or Reverb and you can adjust the Mix and Repeat parameters on the amplifier's panel. And with the mobile APP; you can choose one of the three types of Delay effects and you can reach the Repeat, Mix and Time parameter controls (and the mobile TAP TEMPO) AND there are also three types of Reverb effects, you can control the Decay and Mix parameters. Plus, you can control the drum machine as well. As an exclusive, there are 3 modulation effects and a noise gate with related parameter controls. And we added a backing track library for your jam, but don't forget, the internet is the biggest backing track library. You can find everything you need for improving your guitar skill or jamming. Mighty Lite BT provides the musical sound that will keep you playing for countless hours. Each preset can be customized, and you can save the presets to personalize your amp with your very own sounds. For Android Users; Usually, connecting your device to the Mighty series amplifiers is the same as connecting a Bluetooth speaker. Open the Bluetooth and scan for the devices, select the amplifier and done. If you are having a connection problem; You might need set the location access manually, please check the Bluetooth > Location settings on your device. The setting is either ACCESS COARSE LOCATION or ACCESS FINE LOCATION. When your device is successfully connected. You can broadcast music now. Open the Mighty APP and select Bluetooth Options on the right bottom (touch the Bluetooth logo). Normally you can see your device name on the screen here, if it's not on the screen; touch the Select Device and choose your amplifier. Now you can activate the MIDI control and you can control your amplifier with your mobile device.

Specifications Input Impedance: INPUT 1M ohms , AUX-IN 100K ohms Maximum Output Power: 60W RMS Speaker: 6.5”, 4ohm, 60W, FRFR Loud Speaker Frequency Response Range: 40Hz ~ 16kHz Power Supply: DC28V, 4A (Center Negative) Dimensions: 300mm x 225mm x 326mm Highlights Bass Amp Modeling with Cab IRs extend various tone ability. Support 3rd party IRs(1024 samples) loading with Mighty Bass edit software. White-box compressor effect offers you analog touch and response. Independent IR toggle switches for Amp and DI out. USB audio stream for recording interface with routing setup. Including NMP-2 to remote Drum & Loop(60 seconds). Portable and versatile. 50 watts compact modeling bass amp with 6.5" loud speaker Gate, EFX, Amp Model, IR, Modulation, Reverb Drum & Loop (60s phrase loop) Bluetooth Audio Stream Free APP controller for preset access, management and editing USB recording interface, firmware update, edit software Rear panel: USB PORT: Firmware Update, Edit Software, Recording DI OUT: You can use DI OUT for balanced signal to interface or PA system. IR TOGGLE SWITCH: You can engage Cabinet Impulse Response signal by the independent toggle switches. DI toggle switch is related to DI OUT. AMP toggle switch is related to AMP. FOOT SWITCH JACK: Connects with NUX NMP-2, you can trigger the TIP(B foot switch) for LOOP function(60 seconds phrase loop) and trigger the RING(A foot switch) for DRUM function. Mighty amp mobile app: Mighty Bass 50BT's Bluetooth can do more than just audio playback. You can also control the amplifier with the MightyAmp mobile application. There are loads of Amp Models, Bass Cabinet IRs, and effects available with our FREE MightyAmp APP. The best part is that you can save all the parameters to each channel for future use

Never Lose Your Ideas; Get Recorded! You can record your instrument without using any audio interface. Mighty Plug has a built-in audio streaming function, so you can connect the Amplug directly to your computer with a Micro B USB cable, and it is ready to play and record. A driver free* solution that helps you to produce music with direct connection. You can use the headphones output for monitoring, you will hear both your guitar and the audio from your computer. Perfect For All Styles -Ultimate Compatibility Mighty Plug works perfectly with active/passive electric guitar and bass, and acoustic-electric guitars with piezo or magnetic pickup. The signal is crystal clear. Also, the compact and light-weight design allows you to play comfortably on any guitar and bass body types, including acoustic guitars and ukuleles Long Battery Life and ECO Mode When you turn ON the Mighty Plug, it will run in ECO mode as the default. If there is no headphones connected for 2 minutes, or there is no signal (from guitar, Bluetooth or USB) for 6 minutes Mighty Plug will turn OFF. ----- Specifications - Guitar and Bass Modes - Acoustic Guitar Simulator with Impulse Response Acoustic Guitar Emulation - 13 Amplifier Models - 20 Impulse Response Files (Speaker Cabinet and Acoustic Guitar) - 19 Variety of Effects - Noise Gate - NUX TS/AC True Simulation of Analog Circuit - Physical Amplifier Modeling Algorithm - Rechargeable Li Battery - 3 Hours Playing Time - Dual Mode Bluetooth 4.2 - Drum Beats: 10 Patterns and Metronome USB Audio Stream Home recording tool *Windows 10 and MAC computers. If you are using Windows 8.1 or lower versions, please download the NUX ASIO Driver and install to your computer.

Mini but Large NUX Flow Tune has a compact design with a large high-definition LCD display. Every one can easily read the notes while standing on the stage. Perfect for live guitarists. Easy to fit, easy to tune. Flow in Tune There are 3 display modes including a Strobo mode and 2 Arrow modes. The featured display is vivid and looks like a flowing river! Simply flow in tune with your guitar. Monitoring while Playing NUX Flow Tune offers True Bypass, Buffered Bypass, as well as a Buffered Bypass Monitor mode which can help you monitor the tuning even while you are playing. TB (True Bypass): When the tuner is bypassed, the pedal is a True Bypass circuit that has no influence on your output signal. When the tuner is activated and starts tuning, the output will be muted. BF (Buffered Bypass): When the tuner is bypassed, the output signal is driven by a Buffered Bypass circuit. When the tuner is activated and starts tuning, the output will be muted. BFM (Buffered Bypass Monitor): The signal is driven exactly as in the Buffered Bypass mode, while the output remains unmuted no matter the tuner is activated or deactivated. Fits Any Board Compact size and steady weight, easy to fit the pedalboard with velcro.Besides that, the specially-designed footswitch offers comfortable pressing feedback. Tuning range: A0 (27.5Hz) - C8 (4186Hz) Tuning modes: Chromatic, Guitar, Bass Display modes: Strobo Mode, Arrow Mode 1, Arrow Mode 2 Bypass modes: True Bypass, Buffered Bypass, Buffered Bypass Monitor A4 calibration: 430Hz – 450Hz Tuning accuracy: 0.1 Cent Input impedance: 10M Ohm Output impedance: 1K Ohm Current draw: <100mA Weight: 197.4g Dimensions: 97.4mm x 43.5mm x 41.6mm

NUX Konsequent The Konsequent Mini-Delay comes with a back story. Excellent digital delay is more than a simple repetition of sound. It's a dynamic creation of consecutive sound, a desired consequence. When great sound engineers mix multiple delay onto a guitar recording track, there is an inherent challenge: Increasing the rhythmic complexity without losing definition. The desired effects can range from trippy to groovy or a blend of both. Konsequent packs an array of internal processors that replicate the very sound experienced studio engineers were perfecting in the 1980's using expensive rack-mount digital delay systems. The Konsequent does it at a fraction of the cost, and with the convenience of a mini-pedal. Put simply, NUX’s Konsequent Mini Pedal has re-defined delay ! Features: NUX's Dynamic Digital Processor, specifically designed to reduce annoying interference caused by audio peak. NUX's Analog Processor plus Saturation-simulator offering an abundance of overdrive range. Modes: GROOVE PATTERN ( Dotted 8 ). Multi-Delay Output. REGULAR PATTERN ( Simple Delay ). Warm, yet purposefully defined.

NUX Tube Man MKII More gain! That was the overall goal. If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound. The original Tube Screamer pedals used an OP-AMP system, a basic circuitry that became popular for its “perfect amp” attributes. It had no distortion so it had to be overdriven or distorted by re-shaping the signal until it distorts(diode-clipping). Clipping it a little bit gives you Overdrive. Clipping it a lot gives you Distortion. But, there’s a better way! Using an FET Transistor System, which already has overdrive and distortion capabilities is a better approachto maintain the genuine sound you get from an actual analog tube amp. An FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does. Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clarity that lets players cut through a dense mix, without losing fat mid-range.

Bumblebee Manageable Pedalboard NPB-L (Large size): 243(L)x 445(W)x 90(H)mm 8 platform bars Weight: 2,30kg Weight w/bag: 3,60kg Create Your Own Pedalboard Designed with the experience of crafting pedals for more than 10 years. NUX Bumblebee offers you the optimum board space. Allowing you to customize your very own pedalboard in the most efficient way. You can assemble the platforms in order the way you like. Solid, Durable and Light-weight NUX Bumblebee is made by anodized aluminum material; which is "solid as a rock, light as a pillow". The bottom of the platforms are carved and well-supported, and gives you some space to cover your cables without losing any strength. And the side parts are strongly holds all the parts together, it can absorb the shock when you hit your pedal footswitch. Organize Everything There are cable organizers in the box. You can attach to below any platform and it can hold the cables. Easy to organize all the cables and it helps you to save your time when you want to replace or re-organize your pedals. There are 2 ways to use the cable organizers; you can use the clips and attach the cables, and you can use it as a holder and cables can cross inside the organizers. Handle With Care NUX Bumblebee pedalboard have 2 models; Bumblebee L and Bumblebee M. You can choose depending on how many pedals you want to mount on it. And, it comes with a light-weight carrying bag made from water repellent material. The pedalboard bag is water-resistant, it could protect your pedals in some humid areas even small rain.. For the NPB-L front bag, you could even put a 15" macbook pro into it. Smart Design If you are using any control pedal (like MIDI controller or NUX Cerberus), you can design the platform layers with enough space to switch the cables easily. You can put your power supply between the layers, it's very protective. A Versatile Hand Carry Bag Solution For The Travelling Musicians Both of the Bumblebee pedalboards (NPB-M and NPB-L) can fit in a 22-inch luggage, which is allowed to take as a hand carry bag during the flight. But please keep in mind that, airline companies may ask you to give your hand carry bag to the cargo unit if there is not enough space in the plane. This is a 22-inch luggage and Bumblebee NPB-L pedalboard with full of pedals, still there is a lot of space for accessories, cables or any other stuff etc. Included Accessories; Bag strap, Dual lock Hook&Loop Cable Organizer

NUX Bubmlebee Pedalboard NPB-M NPB-M( Medium size): 243(L)x 445(W)x 90(H)mm 6 platform bars Weight: 1,70+-0,5kgkg Weight w/bag: 280kg Create Your Own Pedalboard Designed with the experience of crafting pedals for more than 10 years. NUX Bumblebee offers you the optimum board space. Allowing you to customize your very own pedalboard in the most efficient way. You can assemble the platforms in order the way you like. Solid, Durable and Light-weight NUX Bumblebee is made by anodized aluminum material; which is "solid as a rock, light as a pillow". The bottom of the platforms are carved and well-supported, and gives you some space to cover your cables without losing any strength. And the side parts are strongly holds all the parts together, it can absorb the shock when you hit your pedal footswitch. Organize Everything There are cable organizers in the box. You can attach to below any platform and it can hold the cables. Easy to organize all the cables and it helps you to save your time when you want to replace or re-organize your pedals. There are 2 ways to use the cable organizers; you can use the clips and attach the cables, and you can use it as a holder and cables can cross inside the organizers. Handle With Care NUX Bumblebee pedalboard have 2 models; Bumblebee L and Bumblebee M. You can choose depending on how many pedals you want to mount on it. And, it comes with a light-weight carrying bag made from water repellent material. Smart Design If you are using any control pedal (like MIDI controller or NUX Cerberus), you can design the platform layers with enough space to switch the cables easily. You can put your power supply between the layers, it's very protective. A Versatile Hand Carry Bag Solution For The Travelling Musicians Both of the Bumblebee pedalboards (NPB-M and NPB-L) can fit in a 22-inch luggage, which is allowed to take as a hand carry bag during the flight. But please keep in mind that, airline companies may ask you to give your hand carry bag to the cargo unit if there is not enough space in the plane. This is a 22-inch luggage and Bumblebee NPB-L pedalboard with full of pedals, still there is a lot of space for accessories, cables or any other stuff etc.

Specifications Keyboard - 88 keys - Triple-sensor scaled hammer-action keyboard (with escapement and ivory feel) - Touch Sensitivity: 5 types (Super Light/Light/Medium/Heavy/Super Heavy) Sound - Sound Chip: Dream 5708 DSP - Max. Polyphony: 189 - Tones: 12 built-in tones Effects/Functions - Reverb and Delay: 5 types (Hall/Church/Plate/Stage/Delay; reverb depth adjustable) - Chorus: 4 depth levels - Tone Brilliance: 5 levels - Dual/Layer: Yes (mix balance adjustable) - Twin Piano: Yes (split point adjustable; individual octave shift and tone selection) - Octave Shift: Yes (-1 to +1 octaves) Functions - Bluetooth: Yes (MIDI and audio) - Transpose: -6 to +5 in semitones - Rhythm: 12 drum patterns - Demo Songs: 30 - Metronome: 9 beats, tempo range 20 to 280 bpm - Recording: 1 song (approx. 18000 notes total) - Master Tuning Range: 415Hz to 460Hz - User Preset: 2 memory banks - Auto-sleep: Yes Pedal - Damper (included), 3-Pedal Unit (optional) Connectivity - USB MIDI, AUX IN, LINE OUT, Headphones X 2, Damper Pedal Jack, Connector for 3-Pedal Unit Amplifiers and Speakers - Preamp: Tl Preamp Chip - Speaker: 10W X 2, 3" X 6" Oval Speaker Power Supply - DC 12V/2A Size and Weight - Dimensions: 1300mm x 270mm x 135mm - Weight: 10kg

Flygelfølelse i fingrene NPK-20 er utstyrt med vårt WJK 03 "Triple-Sensor"-klaviatur (m/ "let off"-mekanikk og tangenter i syntetisk elfenben og ibenholt). Det har oppgradert prosessering for tangentene, for en naturlig og jevn spillefølelse som gjør det lettere å spille f.eks. legato. NPK-20 har også et design som sørger for å minimere uønsket støy fra tangentene. Dermed er pianoet velegnet for alle behov, enten det er til øving eller konsert, og gjenskaper følelsen av et ekte flygel. Dynamisk og fyldig lyd Å gjenskape lyden av et autentisk og mektig flygel kan være en tøff oppgave. Med NPK-20 klarte vi dette ved å ta opp lyden fra et høykvalitets flygel i fullstørrelse. Men det stopper ikke der - vi har inkludert totalt 271 lyder, fordelt på 7 grupper som alle velges via topp-panelet. Alle lydene har blitt prosessert med den største nøyaktighet, slik at du vil oppleve mektig, rik lyd fra et stort utvalg instrumenter. Du kan også kombinere to forskjellige instrumenter samtidig, som f.eks. piano med lyden av et orkester i bakgrunnen. Mikrofoninngang med romklang En perfekt løsning for singer/songwriters: pianoet har også en inngang for dynamiske mikrofoner med egen volumkontroll og romklang. Dermed har du alt du trenger for en opptreden. Profesjonelle effekter og EQ NPK-20 har også innebygde effekter: 4 typer romklang, 4 kompressortyper, chorus og delay. Disse kan alle kombineres og justeres akkurat slik du vil, og innstillingene kan lagres til senere bruk. Vi har også inkludert en 9-bånds EQ, hvor du kan finne den lyden som er perfekt for deg og det du lytter gjennom - enten det er en forsterker, hodetelefoner, eller de innebygde høyttalerne. Også her kan innstillingene lagres etter ulike behov. Auto-akkompagnement Med denne funksjonen har du enkel kontroll over ulike typer akkompagnement, og kan f.eks. styre dets akkorder og progresjoner med én og én tangent. Det er også støtte for forskjellige låtstrukturer, slik at du kan spille fullverdige sanger, helt alene. Og dersom du velger bort denne funksjonen, får du tilgang på en trommemaskin i stedet. Mulighetene er derfor nesten endeløse! Bluetooth MIDI & Audio Bluetooth Audio lar deg strømme musikk fra din mobilenhet til pianoet. Du kan også koble til ulike apper ved hjelp av Bluetooth MIDI. Og apropos apper, NPK-20 inkluderer vår gratis-app "Piano Mate", som inneholder et utvalg av partitur. I tillegg er NPK-20 også kompatibelt med ulike tredjeparts-apper. Tekniske spesifikasjoner: Klaviatur: - 88 tangenter - tre sensorer - hammermekanikk - "let off"-mekanikk - syntetisk elfenben og ibenholt - 5 typer "touch"-følsomhet: Super Light/Light/Medium/Heavy/Super Heavy Lyd: - Dream 5708 DSP-lydmotor - Maksimal polyfoni: 108 - 271 innebygde lyder, fordelt på 7 grupper Effekter: - Kompressor: 4 typer - Reverb/delay: 5 typer - Chorus - Tone/brilliance - 9-bånds equalizer - Octave shift (-1/+1 oktav) Akkompagnement og mikrofon: - Dynamisk mikrofoninngang (XLR- og 6.35mm kombinasjonsinngang) med egne innstillinger - Automatisk akkompagnement: 100 typer Øvrige funksjoner: - "Dual/layer"-modus - "Twin piano"-modus - Bluetooth MIDI + audio - Transponering: -6 til +5 semitoner - Demosanger: 100 - Metronom: 9 rytmer, tempo: 20~280 BPM - Innspilling: 5 sanger - 7 minnebanker for brukerdefinerte innstillinger (presets) - "Auto-sleep"-modus Pedaler: - Sustain (inkludert) - Ekstern pedalenhet med 3 pedaler (ikke inkludert, se NUX NPS-1) Tilkoblinger: - USB MIDI - Aux-inngang - Linje ut - 2x hodetelefoninnganger (3.5mm) - Inngang for sustain-pedal - Inngang for ekstern pedalenhet - 1x mikrofoninngang (XLR / 6.35mm) Lydgjengivelse: - Forforsterker: TI Preamp Chip - Høyttalere: 2x 10W 2x 3"x6" - Display: TFT LCD 800x480dpi Strømforsyning: - DC12v / 2A Størrelse og vekt: - Dimensjoner (mm): 1300 (bredde) x 270 (dybde) x 130 (høyde) - Nettovekt: 11,9kg Merk: stativ ikke inkludert.

Mini Studio NUX Mini Studio IR Loader gir deg lyden av 8 ulike forsterkerkabinetter, i lommestørrelse. Lydene er tatt opp fra ekte kabinetter med Impulse Response (IR)-teknologi, og plasseres sist i signalkjeden, der et gitarkabinett ville vært. Helt uten tunge løft! Innebygde kabinettmodeller:* JZ120 (Roland Jazz 120) DR112 (Fender Deluxe Reverb) BS410 (Fender Bassman 410) A212 (VOX AC30 212) TR212 (Fender Twin Reverb 212) 1960 (Marshall 1960A 412) GB412 (Celestion Greenback 412) V412 (Celestion Vintage30 412) Hver modell kan også byttes ut med dine egne IR-filer, så du kan potensielt ha 8 egendefinerte kabinetter i lomma. Oppløsningen på egne filer er 1024 samples. Med "SPACE"-knotten kan du justere størrelsen på rommet det simulerte kabinettet befinner seg i, for ekstra realisme. Det er også inkludert 8 bass-kabinetter, og 8 kabinetter for el-akustisk gitar. For å skifte mellom disse funksjonene holder du fotbryteren nedtrykt i 2 sekunder. Funksjoner: - IR-innlasting for gitar/bass/el-akustisk gitar - Perfekt for studio, scene eller øving - Kan kobles rett i lydkort for opptak av fullverdig gitarlyd Tekniske spesifikasjoner: - 24-bit, 44.1kHz sample-rate - 1024 samples/23ms-oppløsning - Forsinkelse: < 2ms - Strøm: 9VDC - Dimensjoner (mm): 51 (bredde) x 94 (dybde) x 53 (høyde) - Nettovekt: 174g *All the brand and model names mentioned on this page are Trademarks of their respective owners, which are in no way associated or affiliated with NUX and Cherub Technology CO. LTD.

XTC OD The NUX XTC OD pedal from the Reissue Series gives you the overdrive tone from the red channel of the famous boutique amplifier.It has rich harmonics and fast response.The NUX XTC OD is a go-to box ideal for Blues and Classic Rock! OVERVIEW Pure Analog Circuit Smooth and Dynamic Distortion Level, Gain, Tonr True-bypass Hardware Switching -- Specifications Input impedance 1M Ohms Output impedance 10K Ohms Current draw <20 mA Power 9V battery or external AC adaptor delivering 9V DC regulated minimum 300mA Dimensions 121(L) X 77(W) X 48(D) mm Weight 230g

lever switch 3-way, bolts included, no cap 1 5/8" bolt spacing, made in USA 4,8 mm blade

250K audio potentiometer, standard length bushing .375", 3/8" diameter Value: Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistence value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter. Taper: The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume an audio or logarithmic pot will work best for volume applications. Shaft: A split, knurled shaft will hold most knobs. Sometimes the knob is mounted using a set screw. You should order a solid shaft pot, or align the set screw with the split for correct mounting. Bushing: The standard bushing diameter is 3/8" or 9,5mm, used in most made in USA guitars. Another industry standard is M8, as used by guitar builders outside of the USA. When space is limited mini pots are used with a shaft diameter of 7mm. The standard bushing length is .375" for inch type pots and 10mm for metric type pots. Using two nuts it is very easy to set the correct bushing length for knob placement. Specially for pickguard (ST, PB) or control plate mount (TE, JB) the .250" short bushing will fit perfectly using only one nut. For use with a thick or carved top (LP USA) you should order a bushing length of .750". CTS is (and has been since the 50's) a factory standard for most USA brands like Fender and Gibson. Alpha is a good alternative, nowadays used as a factory standard by Ibanez, Epiphone and Squier.

Oasis UK String S/C/T DBL SET Bright High G The first thing you will notice about Oasis Fluorocarbon Ukulele strings is their length (63"). This length is at least twice as long as the length needed to string a concert, soprano or tenor ukulele. Cut the string in half with a scissors and you have two sets of strings. Use one set now and save one for later, or use the second set on another ukulele. Working with a leading ukulele internet forum Oasis have developed two types of strings: warm or bright. Either type is available with either a high or low G string. The high G string is fluorocarbon while the low G is nylon core with copper/silver wrapped wire. The string specifications are listed below: UKE 8000 bright with high G A/1st. 0215", E/2nd .027", C/3rd .030", G/4th . 023" with enough length for two ukuleles.

UKULELE C250SS-N Størrelse: Concert Kropp: Heltre Mahogny Mekanikk: Diecast mekanikk i Krom m/sorte ører Farge: Natur

Crush Acoustic 30 Black 30W forsterkerkombo med batteridrift for akustisk gitar, svart vinyl Nya Orange Crush Acoustic 30 är en smidig och välljudande förstärkar-combo på 30 watt för akustisk gitarr och sång, som kan drivas på såväl batteri som nätström. Den är bestyckad med 1x8" högtalare och har två kanaler, reverb, chorus, notch filter för att eliminera rundgång, balanserad line out, aux in för extern ljudkälla och effektretur. Den har två kanaler, instrument och mikrofon, där kanal 1 är en ren instrumentkanal med 3-bands EQ och en Color switch som adderar lite topp och mid-scoop. Kanal 2 har XLR/Tele kombo-ingång vilken kan användas som en extra gitarrkanal eller för en sångmikrofon, med 2-bands EQ. Här finns även +48V Phantom power för kondensator-mikrofoner. Den vinklade lådan gör det mycket enkelt att få en bra lyssningsposition oavsett om man sitter eller står och spelar. Den tillverkas klädd i klassisk orange vinyl och det finns även en version i svart vinyl. Orange Crush Acoustic 30 är perfekt för små intima gig, fester både utomhus och inomhus, gatumusikanter och som hemma-förstärkare. _____ With over 50 years of experience in great guitar tone and quality, the Crush Acoustic 30 is Orange’s first entry into the world of Acoustic Amplification. At ease in any situation: the lightweight, portable, battery powered acoustic combo continues the Orange traditions of simple but versatile design. The Crush Acoustic 30 is designed to clearly project sound with its angled construction and 30 Watts of power. The two channels and built in reverb and chorus across both channels and the global notch filter can be used to efficiently to precisely combat feedback, leaving you to concentrate on your performance. Whether you busk, play stages, practice at home or all of the above, the Crush Acoustic 30 has you covered, leaving you free to work your magic. Channel 1 – Instrument Channel Dedicated to your acoustic guitar, this channel has a pad switch to take off 10dB off to maintain a clean signal for higher output instruments. The 3-band EQ allows quick changes to your sound and the colour switch boosts presence and slightly cuts the midrange frequencies. Channel 2 – Mic Channel With an XLR input this channel can be used as a second guitar input or separate microphone input, phantom power is switchable as is the mic/line. Global Effects The Crush Acoustic comes with Reverb and Chorus which can be blended between the two channels. The notch filter adjusts the frequency of a narrow-Q filter, to remove frequencies that can help to combat feedback. 30 Watts and Voice of the World 8" Acoustic Speaker The 8" Voice of the World speaker is designed especially for the Crush Acoustic, delivering 30 Watts of power to ensure you are heard loud and clear. Aux-In The 3.5mm Aux-In can be used to plug an MP3 or other similar audio device, allowing you to play along to backing tracks. Battery Powered The Crush Acoustic 30 is the perfect amp to use on the go, the battery compartment takes 10 x AA batteries and gives you 3 hours of power at full volume, 5 hours at 50% volume and 8 hours at low volume. The Crush Acoustic 30 can be powered by the supplied DC adaptor, when connected the batteries are disconnected.

Orange FS-1 Footswitch Fotomkopplare, envägs, för Orange-förstärkare. The Orange FS-1 Footswitch is ruggedly built and connects to your amplifier via any standard instrument cable (not included). Compatible with: - Crush 20, Crush 20RT & Crush 35RT (Channel) - Crush Pro Series (Channel or Reverb) - TH30 & TH100 (Channel) - Dual Terror (Channel) - AD30 (Channel) - OR 50 (Master Volume Defeat) - Custom Shop 50 (EQ Lift – Note: the LED will not illuminate as the Custom Shop uses passive switching circuitry) - Rockerverb (Reverb or Channel) - Thunderverb (Reverb or Channel) - Dual Dark (Channel or Attenuator) - OR100H (Channel or Gain Boost or Global Boost) - OB1-300 & OB1-500 (Blend Control)

The PPC112 is one of the most popular 1×12" cabinets on the market today, and with good reason. Its closed-back, 18mm birch plywood enclosure is slightly bigger than a conventional 1×12. This gives the PPC112 a greater internal volume for a fatter tone with excellent projection. Housing a single Celestion Vintage 30 speaker, the cabinet also features our unique skid runners on the base to acoustically couple the cabinets to the stage to improve low end responsiveness. For lower wattage heads like our Terror Series or the OR15, the PPC112 is an excellent choice.

- Classic shape, size 8 - Indiviudally packaged for hygiene -Special finish in matt - Incl. playing instructions and history of the Jew's harp

Ortega Eclipse Series Concert Ukulele - ECLIPSE-CC4. Enten du bare spiller for hjemmebruk eller opptrer i profesjonelle sammenhenger, har Ortega en ukulele for deg. Det store sortimentet av ukuleler inkluderer Soprano, Concert, Tenor og Baritone ukuleler og tilbys i forskjellige design og med eller uten Ortegas MagusUke preamp/ pickup system. Flere av modellene leveres også med en Deluxe gigbag. Et fantastisk og unikt utseende møter komponenter av høy kvalitet og moderne funksjoner. Med den innebygde armstøtten, det andre lydhullet og egendefinerte Eclipse-kunstverk, er våre Eclipse modeller en absolutt "No brainer". Specs: • 4-strengs Concert Ukulele. • Skala: 380mm. • Bredde ved oversadel: 38mm. • Solid Mahogany topp, Gloss finish. • Solid Mahogany bunn og sider, Gloss finish. • Solid Okoume hals, Gloss finish. • Slotted Headstock. • Walnut topp, bunn og fretboard binding. • Walnut rear headstock veneer. • Walnut fretboard og bridge. • Eclipse fretboard innlegg, custom made. • Eclipse lydhull (topp) custom design. • Bone nut & saddle. • Innebygget armstøtte, 2. lydhull. • Singel stemmemekanikk, gull. • Ortega Concert strenger. • Deluxe gig bag er inkludert.

Ortega Eliminator Series Feedback Eliminator/ Soundhole Cover - ELIMINATOR100. For Westerngitar og akustisk bass. Bare plasser Eliminator i lydhullet på din akustiske gitar, og feedback problemene er løst. Designet for å kunne spille med stort volum på scenen uten risiko for uønsket feedback. Trygt for instrumentets finish på grunn av den myke gummidesignen. • Enkel installering. • 100mm / 4" diameter. • Feedbackfri spilling med høyere volum. • Passer de fleste stålstrengsgitarer og akustiske basser. • Laget i myk gummi.

Ortega Eliminator Series Feedback Eliminator/ Soundhole Cover - ELIMINATOR86. For klassisk gitar. Bare plasser Eliminator i lydhullet på din akustiske gitar, og feedback problemene er løst. Designet for å kunne spille med stort volum på scenen uten risiko for uønsket feedback. Trygt for instrumentets finish på grunn av den myke gummidesignen. • Enkel installering. • 86mm / 3,38" diameter. • Feedbackfri spilling med høyere volum. • Passer de fleste nylonstrengsgitarer. • Laget i myk gummi.

K-2 serien ur Ortegas Keiki serie är fullstora ukuleles som kommer i ett paket med stämapparat, axelband, väska och plektrum. Varje modell har en design av gatukonstnären Guglielmo Gasloli. - Specifikationer: • Sopran ukulele. • Skala: 364mm. • 36mm bredd vid översadel. • Agathis topp med custom design. • ABS sidor och bakstycke. • Okoume hals. • ABS greppbräda och stall. • Open gear mekaniker. • Väska, plektrum, axelband och stämapparat medföljer.

LIZZY-BS-GB Ortega Akustisk bas m.mik, Lizard Series. I Ortegas sortiment hittar du ett stort sortiment av akustiska basar i olika utföranden. 4 och 5-strängade, med lång eller kort mensur, en del med inbyggd pickup/preamp system, i olika träslag, finishar och färger, även vänster-modeller. Alla levereras med Deluxe gigbag och axelband. Lizard Series har en extra kort mensur, MagusUkebass preamp/pickup system och är i matt mahogny finish. Specification: • Scale: 510mm. • 45mm width at nut. • Mahogany top, satin finish. • Mahogany back & side, sain finish. • Mahogany neck, gloss finish. • Rosewood fretboard & bridge. • Black ABS binding/white pufling.. • Ortega MagufUkebass preamp/pickup system. • 2 way truss rod. • 15 frets. • Aquila Thundergut Ukebass strings short scale. • FREE Deluxe gigbag & Nylon strap included. • Finish: Satin Mahogany.

Ortega Barkrakk/ Scene stol 24" - OBS24-BLKC. Blue Kaleidoscope. Den perfekte barkrakk for hjemmebaren, eller perfekt krakk på scenen. • Sort hardware. • Blue Kaleidoscope sete. • Høyde: 24" / 61cm. • Vekt: 5,5kg.

Ortega Barkrakk/ Scene stol 24" - OBS24V2. Den perfekte barkrakk for hjemmebaren, eller perfekt krakk på scenen. • Sort hardware. • Brunt sete. • Høyde: 24" / 59cm. • Vekt: 5,5kg.

OGH-1WH. Guitar Wall-hanger straight, White. Inkl.monteringskruvar.

Ortega Wood Base Guitar/ Bass Wall Hanger - OGH-1. Black. ---- Veggoppheng for gitar og bass som gjør at instrumentet henger flatt mot veggen. Bakstykke i tre og med myk polstring på opphengspunktet. Monteringsskruer medfølger.

Ortega Wood Base Guitar/ Bass Wall Hanger - OGH-1WN. Walnut. --- Veggoppheng for gitar og bass som gjør at instrumentet henger flatt mot veggen. Bakstykke i tre og med myk polstring på opphengspunktet. Monteringsskruer medfølger.

Professionell ukulele gigbag tillverkad i kraftigt nylonmaterial. Tjock stoppning och med extra kraftiga dragkejor. Innermått: 62 cm / 24,41''.