Forsiden
Ønskeliste
Helland Musikksenter AS
Min side  
Varen er lagt i handlekurven
Totalt 0,-
Varen er lagt i handlekurven

Kategorier
Du er her: Forsiden > Strengeinstrumenter
Stagg SNCL001 Gitar reim - • Lyd-hulls nylon stropp for Klassiske gitarer og Ukuleler • (25 mm) nylon stropp med plast lyd-hulls krok • halsstropp med to spenner, for lengdejustering fra (68,6 til 91,4 cm)

Stagg SNCL001-BK Klassisk Gitar Reim med Krok

95 kr
- +
Deluxe machine heads 3 x 3, with half-closed axis, for classical guitar, gold finish, white buttons

Stagg SP-MHCL DLX Klassisk Gitar Mekanikk Deluxe, Gull

349 kr
- +
Diecast machine heads 2 x 3, for acoustic guitar - buttons: composite wood, black

Stagg SP-MHWS-BKBB Stemmeskruer Mekanikk 3+3 Western Sort

300 kr
- +
Diecast machine heads 2 x 3, for acoustic guitar - chrome finish

Stagg SP-MHWS-CH Stemmeskruer Mekanikk 3+3 Western Diecast, Krom

300 kr
- +
The Ray4 bass is the cousins of the Music Man StingRay 4 bass. Classic, iconic instruments that defined a generation of bassists since the late 70's. Active electronics, low noise hum bucking pickups, rock solid hardware and a simple, uncluttered look that is instantly recognizable and respected. - -Basswood body -Maple neck with Jatoba fretboard -21 frets -6 bolt neck attachment -H1 ceramic humbucker -Active preamp with 2-band EQ

Sterling by MusicMan RAY4-BK El.Bass, MN, Black, "Rigget ved vårt verksted"

5 850 kr
- +
The Ray4 bass is the cousins of the Music Man StingRay 4 bass. Classic, iconic instruments that defined a generation of bassists since the late 70's. Active electronics, low noise hum bucking pickups, rock solid hardware and a simple, uncluttered look that is instantly recognizable and respected. - -Basswood body -Maple neck with Jatoba fretboard -21 frets -6 bolt neck attachment -H1 ceramic humbucker -Active preamp with 2-band EQ

Sterling by MusicMan RAY4-WS El.Bass, Walnut Satin, Rigget ved vårt verksted

4 475 kr
- +

StewMac Precut Fretwire, 24 pc set, Medium, 7"Radius

375 kr
- +

StewMac Precut Fretwire, 24 pc set, Medium/Higher, 7,25"Radius

395 kr
- +
neck shim 0.25 degree shaped for electric bolt-on neck guitar To change the angle of a bolt-on neck, players and repair shops have used shims for years. All kinds of materials have been used, from matchbook covers to guitar picks stuck in neck joints. In the early days Fender™ used shims for factory setup work as well, particularly for JM and Jag models. At first a synthetic rubber strip was used, from the mid-sixties a material similar to thin cardboard / sandpaper appeared. These kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. As Dan Erlewine describes in his Guitar Player Repair Guide: "This gap may cause an upward kink in the neck. And many players feel they lose tone unless firm contact is maintained between the neck and the body." StewMac created tapered shims that cover the entire heel of the neck. With these ready-made shims, that work is done for you. Making a quality shim takes time! Keep these on hand for a quick turnaround on this common repair. There are 3 different degrees available for changing the pitch of a bolt-on neck. The 0.25-degree shim offers the most versatility. Stacking them will let you really dial in the neck angle you're after. The 0.5-degree shim is the one you'll reach for most often. It works great on Fender™ and many other solid body guitars. The 1-degree shim is great for guitars like the JM and Jag that benefit from a setup with a steeper neck angle in order to increase string pressure on the bridge. Current ‘American Original’-reissues of these models actually feature a 1-degree angled neck pocket to negate the need for a shim but vintage guitars and earlier reissues from the USA, Mexico and Japan don’t have this feature. Taper specs (approximate): 0.25-degree shim tapers from 0.030" to 0.019" (0.76mm to 0.48mm) 0.5-degree shim tapers from 0.028" to 0.008" (0.71mm to 0.20mm) 1-degree shim tapers from 0.060" to 0.010" (1.52mm to 0.25mm) Dimensions: 2-3/16" x 3" (55.56mm x 76.12mm) These shims fit most Fender™ neck pockets with a rounded heel. You can trim along the lasered line to fit the shim to a pocket with a flat heel, like a TL. Made of solid maple to match the guitar neck.

StewMac SM2135-025 Neck Shim 0,25 Degree Shaped for Electric Bolt-On Neck Guitar

355 kr
- +
neck shim 0.5 degree shaped for electric bolt-on neck guitar To change the angle of a bolt-on neck, players and repair shops have used shims for years. All kinds of materials have been used, from matchbook covers to guitar picks stuck in neck joints. In the early days Fender™ used shims for factory setup work as well, particularly for JM and Jag models. At first a synthetic rubber strip was used, from the mid-sixties a material similar to thin cardboard / sandpaper appeared. These kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. As Dan Erlewine describes in his Guitar Player Repair Guide: "This gap may cause an upward kink in the neck. And many players feel they lose tone unless firm contact is maintained between the neck and the body." StewMac created tapered shims that cover the entire heel of the neck. With these ready-made shims, that work is done for you. Making a quality shim takes time! Keep these on hand for a quick turnaround on this common repair. There are 3 different degrees available for changing the pitch of a bolt-on neck. The 0.25-degree shim offers the most versatility. Stacking them will let you really dial in the neck angle you're after. The 0.5-degree shim is the one you'll reach for most often. It works great on Fender™ and many other solid body guitars. The 1-degree shim is great for guitars like the JM and Jag that benefit from a setup with a steeper neck angle in order to increase string pressure on the bridge. Current ‘American Original’-reissues of these models actually feature a 1-degree angled neck pocket to negate the need for a shim but vintage guitars and earlier reissues from the USA, Mexico and Japan don’t have this feature. Taper specs (approximate): 0.25-degree shim tapers from 0.030" to 0.019" (0.76mm to 0.48mm) 0.5-degree shim tapers from 0.028" to 0.008" (0.71mm to 0.20mm) 1-degree shim tapers from 0.060" to 0.010" (1.52mm to 0.25mm) Dimensions: 2-3/16" x 3" (55.56mm x 76.12mm) These shims fit most Fender™ neck pockets with a rounded heel. You can trim along the lasered line to fit the shim to a pocket with a flat heel, like a TL. Made of solid maple to match the guitar neck.

StewMac SM2135-050 Neck Shim 0,5 Degree Shaped for Electric Bolt-On Neck Guitar

355 kr
- +
neck shim 1.00 degree shaped for electric bolt-on neck guitar To change the angle of a bolt-on neck, players and repair shops have used shims for years. All kinds of materials have been used, from matchbook covers to guitar picks stuck in neck joints. In the early days Fender™ used shims for factory setup work as well, particularly for JM and Jag models. At first a synthetic rubber strip was used, from the mid-sixties a material similar to thin cardboard / sandpaper appeared. These kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. As Dan Erlewine describes in his Guitar Player Repair Guide: "This gap may cause an upward kink in the neck. And many players feel they lose tone unless firm contact is maintained between the neck and the body." StewMac created tapered shims that cover the entire heel of the neck. With these ready-made shims, that work is done for you. Making a quality shim takes time! Keep these on hand for a quick turnaround on this common repair. There are 3 different degrees available for changing the pitch of a bolt-on neck. The 0.25-degree shim offers the most versatility. Stacking them will let you really dial in the neck angle you're after. The 0.5-degree shim is the one you'll reach for most often. It works great on Fender™ and many other solid body guitars. The 1-degree shim is great for guitars like the JM and Jag that benefit from a setup with a steeper neck angle in order to increase string pressure on the bridge. Current ‘American Original’-reissues of these models actually feature a 1-degree angled neck pocket to negate the need for a shim but vintage guitars and earlier reissues from the USA, Mexico and Japan don’t have this feature. Taper specs (approximate): 0.25-degree shim tapers from 0.030" to 0.019" (0.76mm to 0.48mm) 0.5-degree shim tapers from 0.028" to 0.008" (0.71mm to 0.20mm) 1-degree shim tapers from 0.060" to 0.010" (1.52mm to 0.25mm) Dimensions: 2-3/16" x 3" (55.56mm x 76.12mm) These shims fit most Fender™ neck pockets with a rounded heel. You can trim along the lasered line to fit the shim to a pocket with a flat heel, like a TL. Made of solid maple to match the guitar neck.

StewMac SM2135-100 Neck Shim 1 Degree Shaped for Electric Bolt-On Neck Guitar

355 kr
- +

Strengesveiv / Mekanikksveiv

35 kr
- +

Switchcraft Cap/Knob til Toggle Switch

22 kr
- +
Switchcraft SC-11 chassis connector jack. 2-pole. nickel. 6.3mm. .276 bushing depth. 3/8" 32 thread

Switchcraft SC-11 Chassis Jack Inntak, 2-pole, Mono

89 kr
- +
Switchcraft SC-12B chassis connector jack. 3-pole. nickel. 6.3mm. .276 bushing depth. 3/8" 32 thread

Switchcraft SC-12B Chassis Jackinntak. 3-pole. nickel. 6.3mm

110 kr
- +
thick panel jack, for 6,3mm, 2-pole, nickel, made in USA

Switchcraft SC-151 Thick Panel Jack, Mono, Nickel

259 kr
- +
thick panel jack, for 6,3mm, 3-pole, made in USA, nickel

Switchcraft SC-152B Thick Panel Jack, Stereo, Chrome

279 kr
- +
Thick panel jack, for 6,3mm, 3-pole, brass, Made in USA

Switchcraft SC-152 Thick Panel Jack, Stereo, Messing

265 kr
- +
Thick panel jack, for 6,3mm, 3-pole, black, Made in USA

Switchcraft SC-155 Thick Panel Jack, Stereo, Sort

320 kr
- +
Endpin jack, solder 6,3mm fem jack, nickel, made in USA

Switchcraft SC-6J1216 Endpin Jack

235 kr
- +
Switchcraft toggle switch 3-veis, nikkel, uten topp Made in USA

Switchcraft SW-210-N Toggle Switch, Nickel, no cap

498 kr
- +
toggle switch 3-way angled, no cap, for thin body guitars (SG, Explorer, Firebird), nickel Made in USA

Switchcraft SW-230-N Toggle Switch Vinkel, Nickel, Thin Body, no cap

679 kr
- +

Switchcraft SW-DKN-G Nedsenket Top Mutter til Toggle Switch, Gold

70 kr
- +
Made in USA

Switchcraft SW-DKN-N Nedsenket Top Mutter til Toggle Switch, Nickel

70 kr
- +
J-style electric bass guitar, white, with gig bag Specs: Scale: 864mm Body: Solid Basswood Neck: Selected Canadian Maple, satin Finish Truss Rod: 2 Way Truss Rod Fingerboard: engineered Rosewood Frets: Nickel Number of Frets: 21 Position Marks: Dots Inlayed, White Machine Heads: Open-Gear, Chrome Nut: Synthetic Bone Nut Width: 38mm Bridge: Chrome Pickups: 2 x Single Coil Controls: 2x volume, 1x tone Pickguard: tortoise, 3 ply Color: white Finish: Glossy

SX Vintage BD1 El. Bass Gitar, J-style inkl. Bag, "Rigget ved vårt verksted"

3 525 kr
- +
electric guitar 62 vintage style, 3 single coil pickups , vintage tremolo, sunburst, incl. gig bag The VTG series has a lot of vintage features in an affordable package. The look, playability and sound will overwhelm you. The wood used in this guitar is of higher quality which can be heard and can be felt in the stability of the whole guitar. SX has a colour palette that is vintage-correct and gives this guitar a very classy look. This is the guitar that you will hang on to even if you are a very experienced player and have instruments many time its price. The best in its price range - Position marks : dots inlayed, white machine heads : die-cast, chrome nut : synthetic bone nut width : 42mm bridge : vintage tremolo, chrome strings : D'Addario pickups : 3 x single coils controls : 1 volume, 2 tone, 5 way switch pickguard : vintage green/black/vintage green, 3-ply color : 3 tone sunburst finish : glossy

SX Vintage SST62 El. Gitar - 3 Tone Sunburst inkl. bag "Rigget ved vårt verksted"

3 295 kr
- +
Elgitarr med kropp i basswood och hals i kanadensisk lönn. Utrustad med tre single coil pickuper och vintage svajstall. Levereras med gigbag. * Specifikationer - Scale : 648mm - Body : solid basswood, S-S-S routing - Neck : selected Canadian maple - Truss rod : 2 way truss rod - Neck reinforcement: engineered wood - Fingerboard : engineered wood - Frets : nickel - Number of frets : 21 - Position marks : dots inlayed, black - Machine heads : die-cast, chrome - Nut : synthetic bone - Nut width : 42mm - Bridge : chrome - Strings : D’Addario - Pickups : 3x single coil - Pickup configuration : S-S-S - Controls : 1 volume, 2 tone, 5 way switch - Pickguard : vintage green/black/vintage green, 3-ply - Color : Candy Apple Red - Finish : glossy

SX Vintage SST62 El. Gitar, Candy Apple Red inkl. bag, "Rigget ved vårt verksted"

3 295 kr
- +
The VTG series has a lot of vintage features in an affordable package. The look, playability and sound will overwhelm you. The wood used in this guitar is of higher quality which can be heard and can be felt in the stability of the whole guitar. SX has a colour palette that is vintage-correct and gives this guitar a very classy look. This is the guitar that you will hang on to even if you are a very experienced player and have instruments many time its price. The best in its price range! specifications: scale : 648mm body : solid basswood, S-S-S routing neck : selected Canadian maple truss rod : 2 way truss rod fingerboard : engineered wood fingerboard radius: 12" frets : nickel number of frets : 21 position marks : dots inlayed, white machine heads : die-cast, chrome nut : synthetic bone nut width : 42mm bridge : vintage tremolo, chrome strings : D'Addario pickups : 3 x single coils controls : 1 volume, 2 tone, 5 way switch pickguard : vintage green/black/vintage green, 3-ply color : lake placid blue finish : glossy

SX Vintage SST62 El. Gitar - Lake Placid Blue inkl. bag "Rigget ved vårt verksted"

3 295 kr
- +
Made of Premium Italian Leather, our Gibson by Thalia Premium Straps include an integrated exotic wood inlay. This beautiful strap includes a Santos Rosewood inlay with Mother of Les Paul Pearl Logo. SPECIFICATIONS: Width: 2.5 inches (63.5mm) Thickness: 3/32 inch (3mm) Maximum Length: 54 inches (1,372mm)

Thalia Gibson Santos Gitar Reim Sort, Rosewood med Pearl Logo

995 kr
- +

Tommel Plekter, Perloid

27 kr
- +
Not subject to CITES Electro-Acoustic Dreadnought Solid spruce cover Back and sides Mahogany Mahogany neck Dovetail neck-body-joint Scale 650 mm, nut width 43 mm Bonoid nut and bridge inlay Chrome covered tuners Optima strings, made in Germany VGS ECT-4 Preamp with 4-band EQ and built-in tuner Made in Europe - VGS - The idea of this brand stands for reliable engineering, traditional styles, combined with innovation and refreshing design. With great care we pay attention to the used material and its processing to optimise sound, comfort and playability. Good sound does not need to be expensive.

VGS Akustisk Gitar RT-1E Root med Mikrofon/Preamp, Natur Matt, Open Pore

2 895 kr
- +
•Electro-Acoustic Stage model with cutaway •Solid Spruce top •Mahogany back and sides •Mahogany neck, Rosewood fingerboard and bridge •Dovetail neck/body joint •Scale 650 mm, nut width 43 mm •Bonoid nut and bridge inlay •VGS "Avalanche" bridge •Chrome plated machine heads •Optima strings, made in Germany •Fishman Isys+ with integrated tuner •Made in Europe VGS - The idea of this brand stands for reliable engineering, traditional styles, combined with innovation and refreshing design. With great care we pay attention to the used material and its processing to optimise sound, comfort and playability. Good sound does not need to be expensive.

VGS Akustisk Gitar RT-S E Root Cutaway med Mikrofon/Preamp, Sort

5 750 kr
- +

Vintage Gitarmekanikk for Slotted Headstock med Hvite Ører

595 kr
- +
The PX-Solar Deluxe Series is the signature line of swedish guitarist and producer Ola Englund (The Haunted, Feared, former Six Feet Under...). PX-Solar Deluxe guitars feature an EverTune® bridge, which keeps the guitars in tune under any condition or abuse, full access neck joints, alder bodies and ebony fingerboards. Coupled with their stealth looks and distinctive binding, the PX-Solar Deluxe guitars are very solid, precise and professional instruments that will satisfy any metal player. "The Solar line of guitars have everything I want out of a guitar, the tone, the feel, the looks. Everything just falls into place when I have one in my lap. Washburn gave me free hands to design whatever I wanted, no questions asked, and the outcome is a dream come true." - Ola Englund GENERAL MODEL: PX-SOLAR170C SERIES: Parallaxe BODY SHAPE: Solar Double Cutaway BODY: Alder NECK MATERIAL: Maple FRETBOARD: Ebony with 24 Frets NUMBER OF FRETS: 24 frets INLAYS: Ola Englund inlay at 12th NUT: Graphite NUT WIDTH: 43 mm SCALE: 25.5 ELECTRONICS PICKUPS: Duncan Designed Humbuckers PICKUP CONFIGURATION: H / H CONTROLS: 1 Volume/1 Tone PICKUP SELECTOR: 5 way blade HARDWARE HARDWARE: Black Hardware BRIDGE: Fixed Bridge TUNERS: Black Grover Exclusive 18:1 OTHER COLOR: Carbon Black FINISH: Matte finish STRINGS: D'addario EXL 120 light gauge

Washburn PX Solar170C 7-str. El.Gitar, Sort Matt

8 495 kr
- +
bridge-tailpiece Teaser, pitch 10,8mm, staggered brass saddles, nickel Dimensions: - Bridge plate: 86mm (l) x 77mm (w) - Distance outer body mounting screws (heart to heart): 65mm - String spacing: 54mm

Wilkinson B-WTB-N Tele Style Bridge

575 kr
- +
machine heads for guitar, open geared, 3x left+3x right, chrome, ratio 1:19 These Wilkinson machine heads are designed for solid headstocks. With the gear ratio of 1:19, finetuning has become very easy. These machine heads are also available for slotted headstocks: WJ-28N-CRS specifications butterbean keys baseplate length: 34mm baseplate width: 16,5mm shaft to string hole: 22mm shaft thickness: 6mm bushing width: 9mm (8 mm hole required) bushing length: 9,6mm bushing overhang headstock: 11mm finish: chrome

Wilkinson WJ28NCR Vintage Gitarmekanikk, 3+3 Chrome

595 kr
- +
Yamaha FG820 Natural Acoustic Guitar Featuring superb projection and volume with a warm, rich tone, the FG820 makes a great full size acoustic guitar both for those starting out and those upgrading from smaller beginner models. ---- Traditional Western Body Solid Spruce Top Mahogany Back & Sides Newly Developed Scalloped Bracing Warm and Strong Sound

Yamaha FG820-II Western Gitar, Natur "Rigget ved vårt verksted"

5 898 kr
- +
The Les Paul Modern Lite embodies the classic style of the Les Paul™ but with a new, thinner all-mahogany body that is both lighter and well-balanced. The body also features a belly cut on the rear for additional playing comfort. The mahogany neck features a rosewood fretboard and fast-playing Slim Taper profile. The Les Paul Modern Lite IS powered by open-coil 490R and 498T humbucker ™ pickups, which provide wide range of sonic capabilities that are perfect for any style of music. Available in five attention-grabbing satin nitrocellulose lacquer finishes and for the first time a on a Core Les Paul model, each Les Paul Modern Lite also includes a matching headstock, adding to its visual appeal. A soft shell case is also included. ---------- Body Shape Les Paul Material Mahogany Neck Neck Mahogany Profile Slim Taper Nut width 43.053mm Fingerboard Indian Rosewood Scale length 628.65mm Number of frets 22 Nut Graph Tech Inlay Acrylic Dot Hardware Bridge Aluminum Nashville Tune-O-Matic Knobs Black Top Hat Tailpiece Aluminum Stop Bar Tuners Grover Mini Rotomatic Plating Chrome Electronics Neck pickup 490R Humbucker Middle pickup 498T Humbucker Controls 2 Volume, 2 Tone Case Case Soft Shell Case

Gibson Les Paul Modern Lite El.Gitar med Deluxe GigBag, Gold Mist Satin

19 799 kr
- +
PRS SE Custom 24 Charcoal Cherryburst Mahognikroppen har en buet flammelønnetopp i en helt nydelig finish. Halsen er av lønn med gripebrett i palisander og tradisjonelle fugleinnlegg. SE Custom 24 er en turnéklar gitar med en kjent spillefølelse og en helt nydelig tone. Kropp: Mahogni med Arched Flame Maple Top Hals: Lønn - 24 bånd / 25" skala Gripebrett: Rosewood med Bird-innlegg - 10” Radius Halsprofil: Wide Thin Oversadel: 42,8 mm Mikrofoner: 2x 85/15 "S" Humbuckere Stemmeskruer: PRS-designet Bro: PRS Patentert Tremolo, støpt Halsfeste: Set Neck Kontroller: 1 stk volum & 1 stk tonekontroll med push/pull Pickup-bryter: 3-veis Gigbag: Inkludert PRS SE - Mye gitar for pengene Som musiker vil du ha et instrument du kan stole på. Et instrument som tåler alt det settes foran, som holder på humøret og som fremfor alt låter fantastisk. Du vil også at det skal se bra ut på scenen og føles godt i neven. Det stemmer, du vil heller ikke at det skal koste en formue. PRS SE-serien gir deg alt dette – rimelige instrumenter bygget for de mest krevende. PRS - Kvalitet & innovasjon utover det vanlige PRS ble startet av Paul Reed Smith i 1985 i amerikanske Stevensville i Maryland og har vært synonymt med banebrytende kvalitet, innovative løsninger og uforlignelig enkle instrumenter å spille på, med en fantastisk lyd helt fra starten. PRS-gitarer har en unik følelse av design og en uovertruffen byggekvalitet. Sammen med deres fleksible respons til gitaristens alle behov, har dette vært grunnlaget for PRS-familiens suksess. "Guess what?" – Paul Reed Smith starter ofte en samtale som dette. Vanligvis etterfulgt av en entusiastisk beskrivelse av hans siste oppdagelse av hvordan man får enda bedre tone i en elektrisk gitar. Ønsket om å stadig utvikle og forbedre avtar aldri og derfor er PRS konstant interessant, spennende og i forkant når det gjelder å bygge både elektriske og akustiske gitarer. I PRS-serien finner du ikke bare gitarer av topp kvalitet, men også fantastiske gitarforsterkere, pickuper & tilbehør av samme toppklasse. John Mayer, Mark Lettieri, Carlos Santana, David Grissom, Clint Lowery, Linkin Park, Orianthi, Mikael Åkerfeldt & Fredrik Åkesson of Opeth, Tim Mahoney of 311, Mark Tremonti of Creed & Alter Bridge, Tommy Kristiansen... Listen med gitarister som elsker PRS kan gjøres lang. Blir du neste familiemedlem?

PRS SE Custom 24 El.Gitar, Charcoal Cherryburst med Gigbag, "Rigget ved vårt verksted"

11 875 kr
- +

Informasjon

Om oss
Kontakt oss
Salgsbetingelser
Betalingsansvar
Personvern

Åpningstider 1 juni til 31 august

Man-fre: 10-16
Lørdag: 10-14

Vi holder feriestengt:
13 juni til 21 juni 2026



Helland Musikksenter AS

Adresse
Infanterivegen 18
3734 SKIEN

Telefon
35 70 63 70

Kart

Utvikling og drift: Deltasoft AS